Rootes Group 1963 Hillman IMP - User Manual

Importance of the free service inspection after 500 miles for optimal car performance and longevity.

Essential regular lubrication and maintenance for car longevity and sustained performance.

Provides general specifications for the engine, including capacity, type, cylinders, bore, stroke, and compression ratio.

Details static ignition timing specifications and measurement methods for optimal engine performance.

Provides specific settings for the Solex carburettor, including jets and venturi sizes.

Explains the operation of various car switches including ignition, lamps, and indicators.

Information on the speedometer, including speed markings and gear recommendations.

Describes the function and expected behaviour of the ignition and generator warning lamps.

Explains the purpose and behaviour of the oil pressure warning lamp.

Safety warning about offensive odours and exhaust fumes when using the heater.

Steps for removing and refitting road wheels, including nuts and tyre pressure.

Procedure for starting the engine when it is cold, including safety lamp checks.

The importance of running-in for durability, economy, and performance.

Recommended maximum road speeds during the initial 1,000 miles of running-in.

Emphasizes the importance of regular lubrication and recommended engine oil change intervals.

Lists recommended lubricants for various vehicle components and operating temperatures.

Procedure for refilling the cooling system and important frost precaution notes.

Details on adjusting the slow running screw for optimal engine idling.

Troubleshooting steps for fuel delivery issues to the carburettor.

Covers engine oil, cooling system level, and battery electrolyte checks for 250-mile or weekly intervals.

Details engine oil change and checks for brakes and clutch fluid for 5,000-mile intervals.

Check oil level, top up, drain/flush cooling system, and examine for leaks.

Check oil level, drain/flush cooling system, refill with anti-freeze, check heater.

Comprehensive list of checks and tasks for the first 500-mile service, covering engine, transmission, suspension, brakes, and electrical systems.