EasyManua.ls Logo

Roper B8758B0 - Replacing the Oven Light; Removable Oven Racks

Roper B8758B0
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REPLACING THE OVEN LIGHT
Do not touch oven bulb when hot, with wet hands, or wrpe oven light area
wrth wet cloth.
Never touch the electrically live metal collar on the bulb when replac-
ing it.
Electrical power must be shut off if you have to replace a broken bulb.
SELF-CLEANING OVENS ONLY:
1. Remove the three screws and lift OH the glass retainer, glass cover
and gasket.
2. Replace the bulb with a 40 watt appliance bulb.
3. Replace the gasket, glass cover and glass retainer. Tighten screws
securely.
- GASKET
GLASS
COVER
u
SELF-CLEANING OVENS
REMOVABLE OVEN RACKS
Be careful not to scratch the oven finish when installing or removing the
oven rack.
To install:
1. Set the raised back edge of the rack on a pair of rack guides.
2. Push the rack in until you reach the bump in the rack guide, then lift
the front of the rack a bit and push the rack all the way in.
To remove:
1. Pull the oven rack out then up.
See the cleaning information on page 13
15

Related product manuals