What to do if the power LED doesn't light up on my Roscoe Medical Personal Care Product?
If the power LED fails to light up, here's what you can check: * Ensure the adapter plug is properly inserted into the socket. * Verify the DC plug of the adapter is correctly connected to the device's DC receptacle. * Make sure you've pressed the ON/OFF button.
Why is the power LED on, but my Roscoe Medical US PRO 2000 2nd Edition DU3035 aren't working?
If the power LED is on but there's no output, the output intensity button setting might be incorrect. Please reset the output intensity.
General| Category | Personal Care Products |
|---|---|
| Model | US PRO 2000 2nd Edition DU3035 |
| Brand | Roscoe Medical |
| Pulse Frequency | 100Hz |
| Frequency | 1 MHz |
| Power Source | AC Adapter |
| Waveform | Pulsed |
| Duty Cycle | 10%, 20%, 50% |
| Timer | 5, 10, 15 minutes |
| Intensity Levels | 3 |
| ERA | 4 cm² |
| Warranty | 1 year |
This device is restricted by US Federal Law to sale by or on the order of a physician or licensed practitioner.
Declares compliance with various normative documents and directives for medical devices.
Emphasizes reading all warnings and precautions to ensure safety and prevent damage.
Provides general information on operation, precautions, and maintenance for optimal device use.
Portable ultrasound for deep tissue treatment of pain, muscle spasms, and joint contractures. Not for malignancies.
Explains how pulsed sound waves generate vasodilation to increase blood flow and aid in pain relief.
Lists specific medical conditions and body areas where the device should not be used to avoid harm.
Outlines important safety measures to follow during device operation, such as avoiding certain areas or conditions.
Lists general cautions and specific patient conditions or body areas to avoid during treatment.
States device compliance with radiation standards and warns of hazardous exposure from improper use.
Labels and identifies the key components of the ultrasound device, including the probe and controls.
Highlights design and functional features like microprocessor control, ergonomic design, and head warming.
Provides a step-by-step guide on how to connect the AC/DC adapter to power the ultrasound unit.
Warns against reassembling or altering the adapter to prevent damage or injury.
Explains how to turn on the device and activate the head warming feature for patient comfort.
Details the correct procedure for applying transmission gel to the treatment area for effective coupling.
Guides users on selecting the appropriate ultrasound intensity (Low, Medium, High) using the mode button.
Instructs on how to choose and adjust the treatment time (5, 10, 15 minutes) using the time button.
Describes how to move the sound head over the treatment area for even application.
Explains how to turn off the device and clean the ultrasound head and probe after use.
Explains the safety features that stop treatment if contact is lost or the head overheats.
Provides instructions for cleaning the device and applicator using damp cloths and approved cleaners.
Advises on inspecting the applicator for damage and methods for disinfection.
Outlines recommended conditions for storing the device to protect it from damage.
Offers solutions for common problems like the power LED not lighting up or no output function.
Lists comprehensive technical details of the ultrasound device, including power, frequency, dimensions, and operating conditions.
Reiterates the legal requirement for a prescription to purchase or use the device.
Explains the meaning of various symbols used on the device and in the manual for safety and identification.
Explains how electronic devices can interfere with medical devices and the importance of EMC standards.
Details precautions for using the device near other equipment and its essential performance aspects.
Provides guidance on the device's electromagnetic emissions and the environment it's intended for.
Details the device's immunity to various electromagnetic disturbances and recommended environments.
Explains immunity to RF fields and provides guidance on interference in the vicinity of marked equipment.
Provides guidelines and calculations for maintaining safe separation distances from RF communication equipment.
Outlines the warranty period, coverage, exclusions, and conditions for the US Pro™ 2000 2nd Edition.
Provides fields for recording product serial number, date of purchase, and distributor details.
To Next Page
