To Next PageTo Next Page
Need help?Do you have a question about the Rosenberg AND Series and is the answer not in the manual?
Covers safety symbols and their meanings for proper operation and hazard awareness.
Highlights potential dangers and emphasizes the need for trained personnel and correct usage.
Lists the specific fan series and models covered by this operating instruction.
Details the construction and standard components of the axial fans.
Describes specific features and design for explosion-proof fan models.
Explains motor specifications, insulation class, and fan balancing standards.
Information on motor data from type plate and operating within performance curves.
Defines acceptable gases, vapors, and air densities for fan operation.
Specifies special operating conditions indicated by the ATEX X-marking.
Outlines maximum allowable fan speeds and motor power limitations.
Guidelines on using Rosenberg-approved accessories and ensuring equipotential bonding.
Recommendations for storing fans in original packaging, including temperature and duration.
Instructions for safe handling and transportation to prevent damage.
Emphasizes that installation and electrical work must be done by qualified personnel.
Procedures for protecting fan openings and checking for transport damage.
Connects conductive parts to a potential equalization system in hazardous areas.
Instructions to avoid distorting the fan or applying excessive force during installation.
Guidance on proper lifting points, ensuring stability, and installing protection guards.
Details on connecting wiring, earthing, and motor protection according to regulations.
Steps for connecting motor protection and verifying correct rotation direction.
Pre-operation checks including installation, safety devices, and connections.
Monitoring fan operation for smooth running, vibration, and current draw.
Ensuring correct operation after repair and using only approved spare parts.
Checks for bearing play, grease leaks, surface protection, and unusual noises.
Guidelines for cleaning fan inlets, impellers, and ensuring fan blade integrity.
Procedure for safely removing and installing the fan impeller.
Steps for disconnecting the motor, replacing it, and reconnecting.
Rosenberg's commitment to environmental protection and resource conservation.
Steps to prepare for machine disassembly, including contacting waste management.
General procedures for disassembling the machine, with safety warnings for heavy parts.
Instructions for sorting machine components into recyclable categories.
Guidance on disposing of auxiliary substances like fat, paint residues, and cleaning cloths.
Procedures for disposing of various types of packaging materials.
Contact information for customer inquiries and technical support.
Visual guide and numbering of the components on the fan's type plate.
Detailed explanation of the information provided in each field of the type plate.
Detailed interpretation of the ATEX marking, including device group, category, and temperature class.
Statements confirming product compliance with EC/EU directives.
Declaration for incomplete machines, confirming compliance with machinery directives.
General| Impeller Material | Aluminum |
|---|---|
| Housing Material | Aluminum |
| Motor Type | EC motor |
| Protection Class | IP54 |
| Applications | ventilation systems |
