To Next Page
T
Tracy KleinAug 18, 2025
Why is my ROSENLEW RTT7122N2 Washer not filling with water properly?
- Jjohn13Aug 19, 2025
If your ROSENLEW Washer isn't filling with water properly, several factors could be at play. First, ensure the water tap is fully open. Check that your water supply pressure isn't too low by contacting your local water authority. Also, make sure the water tap isn't clogged. Inspect the inlet hose for any kinks, damages, or incorrect connections. A clogged drain circuit can also cause this issue, in which case, contact the Authorised Service Centre. Finally, check that the inlet hose filter and valve filter are not clogged.
General