Rosewill RC-20002 User Manual

1
Thank you for purchasing a Rosewill PCI Express Card.
Please read the instruction manual before use and retain for future reference.
RC-20002
INTRODUCTION
1.1 Features
• PCI Express 2.0 x4
• Provides two SuperSpeed 10 Gbps USB 3.2 Gen 2 Type-C ports and two
Type-A ports to support total transfer bandwidth up to 20 Gbps
• Compliant with Intel’s eXtensible Host Controller Interface (xHCI)
Specication Revision 1.1
• Supports Multiple INs
• Supports the following speed data rates:
1.5 Mbps/12 Mbps/480 Mbps/5 Gbps/10 Gbps
• Supports 4 downstream ports for all speeds
• Hot-swapping feature allows you to connect/disconnect devices without
powering down the system
1.2 System Requirements
• Windows 8.x/10 (32/64 bit)
• macOS X 10.10 or later
• Linux 3.5 or later
• One available PCI Express x4, x8 or x16 slots
1.3 Package Contents
• 1 x PCIe Dual Bus USB 3.2 4-Port Controller Card
• 1 x Quick Installation Guide
Note: Contents may vary depending on country/market.

Rosewill RC-20002 Specifications

General

Brand	Rosewill
Model	RC-20002
Category	PCI Card
Language	English

Summary

Introduction

Product Features

Details the product's SuperSpeed USB 3.2 Gen 2 Type-C ports, bandwidth, and hot-swapping.

System Requirements

Lists compatible operating systems (Windows, macOS, Linux) and PCIe slot requirements.

Package Contents

Specifies included items: PCIe Controller Card and Quick Installation Guide.

Getting Started

Hardware Installation Steps

Step-by-step instructions for physically installing the PCI Express card into your computer.

Driver Installation

Guide for automatic driver installation for Windows and macOS systems.