2 RO-PGCE_GUIDE (01/22)
1. WARNINGS AND CAUTIONS
WARNING
Any installation, adjustment, modification, repair, or maintenance not in accordance with applicable standards
may cause property damage, injury, or death. To ensure a safe installation and proper operation
of your Rosko equipment, please read this entire guide and keep it for future reference.
• This unit is intended for commercial use only.
• Installation must meet the requirements of the codes below, where applicable.
◽ State codes or local codes, or in the absence of local codes:
◽ the National Electrical Code ANSI/NFPA 70;
◽ State codes or local codes, or in the absence of local codes:
◽ the Canadian Electrical Code CSA C22.1.
• The installation of this appliance must be done by a certified technician, where required by law.
• Do not store fuels or other flammable materials near the unit.
• In the event of a malfunction, disconnect the unit power supply and contact a service technician.
WARNING
Keep a copy of these instructions in a visible location
1
.
1
This guide is updated as new information or new products become available.
Visit our website rosko-julien.ca for the most recent version of these documents.
To Next Page
Loading...