Need help?Do you have a question about the Ross PC6400B and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Power output | 2 x 400W @ 4Ω |
| Total Harmonic Distortion | <0.1% @ 1kHz |
| Signal-to-Noise Ratio | >100dB |
| Input Sensitivity | 0.775V |
| Input Impedance | 20kΩ balanced, 10kΩ unbalanced |
| Damping Factor | >200 @ 8 ohms |
| Protection | DC, thermal, short circuit, overload |
| Connectors | Inputs: XLR, 1/4" TRS; Outputs: Binding posts |
| Frequency Response | 20Hz-20kHz ±0.5dB |
| Dimensions | 483 x 89 x 381 mm (19" x 3.5" x 15") |
| Weight | 12.7 kg (28 lbs) |
Details on input impedance, sensitivity, connector types, and output levels.
Tests and values for voltage gain, frequency response, distortion, and power output.
Instructions for connecting AC power, checking voltage, and initial setup.
Guidance on power switch usage, speaker wiring, and impedance considerations.
Tips on using EQ, reverb/effects, and best practices for input cabling.
Explanation of Level, EQ, Reverb/Effects, Master, and Monitor controls.
Description of various connection jacks, Phantom Power, and status LEDs.
Instructions on avoiding shock, not opening the unit, and fuse replacement.
To Next Page