Rosslare AYC-E60 User Manual

AYC-E/Q/T60 Family
Backlit
go
PROX & PIN Reader –
Convertible Series with Genuine
HID Technology
™
Installation and Programming Manual
AYC-E60 AYC-Q60 AYC-T60

Rosslare AYC-E60 Specifications

General

Brand	Rosslare
Model	AYC-E60
Category	Intercom System
Language	English

Summary

Introduction

Technical Specifications

Installation Guide

Wiring Instructions

Connecting Unit to Controller

Reader Functionality

Programming the AYC-E/Q/T60 Series

Details how to access and use the keypad-driven Programming Menu System.

Entering Programming Mode

Step-by-step guide to initiate the reader's Programming Menu System.

Exiting Programming Mode

Instructions on how to properly exit the reader's Programming Menu System.

Keypad Transmission Format Selection

HID Prox Card Transmission Format

Rosslare Proximity Card Transmission Format

Changing Programming Code

Guide to modifying the existing 4-digit programming code.

Changing Facility Code

Setting Reader Format

Return to Factory Default Settings

Procedures to reset all configurations and codes to factory defaults.

Controller Functionality

User Levels (Normal, Secure, Master)

Modes of Operation

Explains the three operational modes: Normal, Bypass, and Secure.

Changing Operational Modes

Instructions for switching between Normal, Secure, and Bypass modes.

Lockout Feature Management

Programming the AYC-E/Q/T60 Controller

Overview of the keypad-driven Programming Menu System for controllers.

Entering Controller Programming Mode

Step-by-step guide to initiate the controller's Programming Menu System.

Exiting Controller Programming Mode

Instructions on how to properly exit the controller's Programming Menu System.

Changing Lock Strike Code

Changing Auxiliary Code

Changing Controller Programming Code

Steps to change the controller's programming code.

Changing Normal/Secure Code

Normal/Bypass Code and Door Chime Settings

Setting Fail Safe/Secure, Tamper Siren, and Lock Strike Release Time

Configuration for Fail Safe/Secure, tamper siren, and lock strike release timers.

Defining Auxiliary Input and Output

Setting the Lockout Feature

Selecting Proximity and HID Prox Format

Enrolling User Codes

Explains the process and methods for enrolling user primary and secondary codes.

Deleting User Codes

Relay Code Assignment

PIN Code Length and Factory Defaults

Procedures to change PIN code length and reset to factory defaults.

Replacing Lost Programming Code

Steps to recover or reset a lost programming code for the controller.

Replacing Lost Normal/Secure Code