To Next PageTo Next Page
Need help?Do you have a question about the Roswell Moomba A3 Tower and is the answer not in the manual?
General| Brand | Roswell |
|---|---|
| Model | Moomba A3 Tower |
| Category | Boating Equipment |
| Language | English |
Provides shade and can be stored when not in use.
Storage for extra surfboards on the tower.
Features a patented weightless fold down system for easy storage.
Includes Moomba Accent lights that can be activated from the dash.
Describes fixed mounting options for board racks.
Describes swivel mounting options for board racks.
Lists necessary hardware and tools for bimini installation.
Attaching bimini arms to the tower and initial tightening.
Steps for assembling the bimini frame to the arms.
Attaching and securing the bimini canvas with straps.
Attaching rear velcro and buckle straps for a tight fit.
Step-by-step guide to deploying the bimini from its boot.
Step-by-step guide to collapsing and securing the bimini.
Safety and operational guidelines for folding the tower with bimini.
Procedure to adjust canvas tension for stretching.
Advice on alignment, pin insertion, and hole cleaning.
Ensures safety and proper preparation before folding the tower.
How to operate latches and fold the tower down.
Instructions for returning the tower to its upright position.
Detailed steps for assembling the Triton Board Rack.
Details fixed and swivel mounting for the Triton rack.
Guidelines for board width settings and arm adjustment.
How to properly operate the swivel mechanism.
Visual cues to determine if the swivel is locked.
Instructions for mounting the rack to a fixed tower.
Instructions for mounting the rack to a swivel.
Steps to mount the QR Tower Adaptor.
Connecting the Female Adaptor to the Tower Adaptor.
Attaching the Male Adaptor to the Swivel.
Mounting the board rack to the backing plate.
Connecting the male and female adaptors.
Steps to prepare the tower for weight assist adjustment.
Instructions for removing, measuring, and lubricating spring assemblies.
Steps for reassembling, securing, and testing the weight assist system.
Testing the system and adjusting counterweight if needed.
Detailed diagram showing tower wiring for audio and lights.
