NYLON
ANCHORS
Fig. 10
Fig. 10a
16. Hose Covers and Anchoring
Position hose covers as necessary per control
cabinet location. Use provided anchors to fasten all
hose covers securely, Fig. 10.
Position hose covers directly under each platform
to 1/2” clearance, Fig. 10a.
13mm CLEARANCE
BETWEEN THE EDGE OF
THE HOSE COVER AND
FRAME.
NOTE: IF THE PLATFORMS ARE SPACED FURTHER
THAN 750mm DURING INSTALLATION, SHIFT THE
HOSE COVERS UNDER PLATFORMS AND MIDDLE
HOSE COVERS AS NEEDED TO AVOID GAPS.
21
To Next Page
Loading...
