Rotary WM1 User Manual

18 19
Section SectionAdditional Functions
Chronograph Type B
Before making use of the chronograph function, the timing hands must be
reset to 0 (12 o’clock).
For ‘X’ chronographs, this can be done by pulling the crown out to position
‘B’ and pressing button ‘I’ (Page 12) until the seconds timer hand returns to
12 o’clock. You must then press button ‘II’ to reset the minutes sub-dial.
For ‘Y’ chronographs, this can be done by pulling the crown out to position
‘B’ and pressing either ‘I’ or ‘II’ until the seconds hand timer returns to 12
o’clock. Please note that adjusting the seconds hand timer in this way also
adjusts the minute timer.
Type B Chronographs either use
‘X’ or ‘Y’ as the seconds timer.
An easy way to tell is to push
Button ‘I’ (Page 12) to see which
begins to run.
Additional Functions
Chronograph - Reset Type B
Additional Functions
Chronograph - Reset Type A
X
Y

Rotary WM1 Specifications

General

Brand	Rotary
Model	WM1
Category	Watch
Language	English