Rotax S115 User Manual

56
EENNGGIINNEE CCAARREE
PPoosstt--OOppeerraattiioonn CCaarree
EEnnggiinnee FFlluusshhiinngg
The outboard engine cooling system
should be flushed daily when boat is
used in salt or foul water.
Refer to Maintenance Procedures.
IIMMPPOORRTTAANNTT: The outboard must
be located in a well ventilated area
with appropriate ground drainage dur-
ing the flushing procedures.
Keep water inlet pressure between 20
to 40 psi (140 to 275 kPa).
EEnnggiinnee CCoovveerrss
OOuuttbbooaarrdd EExxtteerrnnaall FFiinniisshh
Periodically, wash the entire boat and
outboard with soapy water and apply
a coat of automotive wax. Leave the
engine covers in place when washing
the outboard.
NNOOTTIICCEE
IIff nneeeeddeedd,, uussee BBRRPP MMaarriinnee
CClleeaanneerr ttoo cclleeaann ppllaassttiicc ccoovveerrss oorr
ppaanneellss.. DDoo NNOOTT uussee ssoollvveennttss
ssuucchh aass aacceettoonnee..

Rotax S115 Specifications

General

Brand	Rotax
Model	S115
Category	Outboard Motor
Language	English