ii
CERTIFICATION
Rotek Instrument Corp. certifies that this instrument has been calibrated to meet or exceed all
the specifications contained in this manual prior to being shipped from the factory. The calibration
has been performed with instruments, the accuracy of which are traceable to the National Institute of
Standards and Technology (N.I.S.T.) formerly known as the National Bureau of Standards (N.B.S.).
WARRANTY
Rotek Instrument Corp. warrants each instrument manufactured by it to be free from defects in
material and workmanship for a period of one year from date of delivery to the original purchaser,
provided the instrument is used in accordance with the instructions in this manual. Rotek's obligation
under this warranty is limited to servicing or adjusting an instrument returned to the factory,
transportation charges prepaid, for that purpose. This is the only warranty offered in connection with
the sale of this instrument, no other warranty is implied. Rotek is not liable for consequential
damages.
If a fault in operation occurs, the following steps should be taken:
1. Notify Rotek Instrument Corp. giving full details of the faulty operation, the model
number and serial number of the instrument. On receipt of this information, service
data or shipping instructions will be provided.
2. On receipt of the shipping instructions, forward the instrument prepaid and all
necessary repairs will be made at the factory.
If it is necessary to return this instrument to the factory, it should be shipped in the original
packing carton. If it is not available, use any suitable rigid container with adequate packing to protect
the unit during transit. Do not ship an unprotected instrument with peanuts (Pieces of foam or other
material) as packing. Always prepare an inner carton.
To Next Page
Loading...