Rotek 811AE - User Manual

Rotek® Instrument Corp., 390 Main Street, Waltham, Massachusetts 02154 USA
Tel. (617) 899-4611
Fax. (617) 894-7273
SERIES 800
PRECISION POWER/ENERGY
METER CALIBRATORS
17th Printing
Effective Starting Serial Number 675

Summary

2.0 Operating Instructions

2.3 Controls and Displays

2.4 General Operating Information

General usage guidelines, model differences, and operational modes.

1.3 Specifications

1.3.1 Models 800 A;811 A

Detailed specifications for Models 800A and 811A.

1.3.2 Models 800 AE;811 AE

Specifications specific to the 800AE and 811AE Enhanced Mode.

2.4 General Operating Information

2.4.1 Model 800 A;800 AE

Specific operating details for Model 800A/800AE.

2.4.10 Model 811 A;811 AE

2.4.11 Energy Instruments With Electrical Pulse Output

2.4.12 Rotating Instruments With No Pulse Output

2.4.13 Rotating Instruments, Fixed Energy

3.0 Theory of Operation

3.3 Controls

4.0 MAINTENANCE

4.1 Required Test Equipment

4.2 Performance Tests

Tests to verify the calibrator meets its specifications.

4.3 Calibration Procedure

Step-by-step guide for calibrating the Series 800.

4.4 Periodic Maintenance

Recommended regular maintenance tasks.

4.5 Troubleshooting

Guide to diagnosing and resolving common faults.

4.2 Performance Tests

4.2.1 AC Voltage Accuracy Tests

Procedure for testing AC voltage accuracy.

4.2.2 Current Accuracy Tests

Procedure for testing current accuracy.

4.2.3 Voltage Distortion Test

4.2.4 Current Distortion Tests

4.2.5 Power Accuracy Tests

Procedure for testing power accuracy.

4.2.6 Deviation Test

4.2.7 Fractional Divider Tests

4.3 Calibration Procedure

4.3.1 Model 800 A;811 A Calibration Procedure

Calibration steps specific to Models 800A and 811A.

4.3.2 Model 800 AE;811 AE Calibration Procedure

Calibration steps for Models 800AE and 811AE.

4.3.3 Factory Adjustments

4.4 Periodic Maintenance

4.5 Troubleshooting

4.5.2 Power Supply Voltages

4.5.3 Suspected Voltage Failure

Steps for troubleshooting voltage-related failures.

4.5.4 Suspected Current Failure

Steps for troubleshooting current-related failures.

4.5.5 Suspected Phase Function Failure

Steps for troubleshooting phase function issues.

4.5.6 Line Synchronization Function Erratic

4.5.7 Isolating an Analog Switch Fault

5.0 IEEE-488 INTERFACE

5.2 Data Entry

5.6 Programming Examples

Rotek 811AE Specifications

General

Type	AC Power Source
Voltage Range	0-300V
Frequency	45-65Hz
Output Voltage Range	0-300V
Frequency Range	45-65Hz
Voltage Accuracy	±0.5%
Interface	RS232