To Next PageTo Next PageWhat to do if my Rotel Adagio coffee just drips out?
If the coffee is dripping out very slowly, it could be because the milling is set too fine. Try setting the milling to a coarser setting. Alternatively, the coffee itself might be milled too fine; in this case, use coarser milled coffee.
Why is my Rotel Adagio missing its foamy layer?
The coffee might be missing its foamy layer because you are not using the right type of coffee. Consider changing the type of coffee you use. Also, ensure that the beans are fresh ground. The milling fineness might not be right for the coffee bean type; adjust the milling fineness accordingly.
What to do if buttons 3 and 6 blink alternately on my Rotel Adagio?
If buttons 3 and 6 are blinking alternately, the central unit is not correctly inserted or locked. Check and lock the central unit to resolve this issue.
Why is there too little milk foam from my Rotel Coffee Maker?
If you're getting too little milk foam, it could be because you are using the wrong kind of milk. Use cold full-cream milk for best results.
How to fix Rotel Adagio when it is not possible to draw off hot water or steam?
If it's not possible to draw off hot water or steam, the jet is likely plugged up. Clean the jet thoroughly.
General| Brand | Rotel |
|---|---|
| Model | Adagio |
| Color | Black |
| Voltage | 220-240 volts |
| Features | Programmable, Anti-Drip System |
Initial steps to prepare the coffee machine before first use, including filling the water tank.
Step-by-step guide for brewing a single serving of coffee.
Instructions for brewing two cups of coffee consecutively.
How to draw steam and create milk foam for beverages.
Detailed steps for foaming milk using the special Cappuccinatore attachment.
Step-by-step guide to perform the automatic cleaning cycle for the machine.
Procedure for removing limescale buildup using the decalcifying program.
