To Next PageTo Next Page
Need help?Do you have a question about the Rotel RAP-1580 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Amplifier class | A/B |
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 7.1 channels |
| Peak power per channel | 100 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | 0.03 % |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 1100 W |
| AirPlay | - |
| Display | LCD |
| Purpose | Home |
| HDCP version | 2.2 |
| Apple docking | No |
| On/off switch | Yes |
| Product color | Silver |
| Rack capacity | 4U |
| Audio decoders | DTS:X, Dolby Atmos |
| Damping factor | 230 |
| Frequency band | 20 - 20000 GHz |
| Connectivity technology | Wired & Wireless |
| Center speaker impedance | 4 Ω |
| RS-232 ports | 1 |
| 12V trigger ports quantity | 3 |
| HDMI in | 8 |
| Remote (IR) output | 2 |
| Bluetooth profiles | APT-X |
| Supported radio bands | Not supported |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
Weight and Dimensions| Depth | 192 mm |
|---|---|
| Width | 431 mm |
| Height | 470 mm |
| Weight | 22800 g |
