Need help?Do you have a question about the Rotel RB-991 and is the answer not in the manual?
General| Total Harmonic Distortion | 0.03% |
|---|---|
| Signal to Noise Ratio | 116 dB |
| Type | Stereo Power Amplifier |
| Number of Channels | 2 |
| Power Output | 200 watts per channel |
| Frequency Response | 10Hz to 100kHz |
| Speaker Load Impedance | 4 ohms minimum |
| Input Impedance | 33kΩ |
Critical warnings about electrical shock risks, especially not opening the unit or improper plug use.
Explanation of symbols indicating hazardous voltages and important instructions.
A guide to locate specific information within the owner's manual by section and page number.
Explains the function of the front panel power button and the power/protection indicator lights.
Troubleshooting steps for when the amplifier does not power on.
Troubleshooting steps for when there is no audio output from the amplifier.
Troubleshooting steps for lack of bass response from the speakers.
Troubleshooting for distorted bass, hum, and general poor audio quality.
To Next Page
