To Next PageTo Next Page
Need help?Do you have a question about the Rotel RR-1050 and is the answer not in the manual?
General| Brand | Rotel |
|---|---|
| Model | RR-1050 |
| Category | Remote Control |
| Language | English |
Lists primary capabilities and functions of the RR-1050 remote control.
Provides essential safety advice and handling instructions for the RR-1050 remote control.
Details the process for inserting batteries into the RR-1050 remote control.
Explains how to operate the RR-1050 and select components for control.
Describes how to teach the RR-1050 commands from other remote controls.
Location and function of the infrared transmitter/receiver on the RR-1050.
Describes the LCD display and its role in information and programming feedback.
Explains the automatic backlighting feature and manual control of the RR-1050.
Details the sliding cover that conceals additional buttons on the RR-1050.
Explains the function of buttons used to select devices and input sources.
Describes the EXT button for special analog input selection on Rotel audio/video receivers.
Details the primary command buttons for controlling audio/video components.
Explains oval buttons under the sliding cover for secondary functions.
Details buttons that can learn up to three commands for multi-step operations.
Describes rectangular buttons for programming and special features.
Explains recessed buttons used for configuring the remote control.
How to program multi-step commands for specific buttons like SCAN.
Covers storing and sending macro sequences of commands.
How to erase learned commands from buttons or macros.
Restores the RR-1050 to its original factory programming.
Transfers programming from one RR-1050 to another.
Resets the RR-1050 to factory settings if it stops functioning.
How to change button labels to customize the display for components or language.
Explains how to send IR commands to control components.
Details how to send macro commands for automated sequences.
Explains the function of buttons that can store multiple commands.
Describes the operation of the LIGHT button for backlighting.
Explains how to toggle the key tone feature on/off.
Explains the low battery indicator on the display.
Describes how to teach the RR-1050 commands from other remote controls.
How to program multi-step commands for specific buttons like SCAN.
Covers storing and sending macro sequences of commands.
How to erase learned commands from buttons or macros.
Restores the RR-1050 to its original factory programming.
Transfers programming from one RR-1050 to another.
Resets the RR-1050 to factory settings if it stops functioning.
How to change button labels to customize the display for components or language.
Explains how to switch between label sets for customizing button names.
Details how to change the label for a specific button.
