www.rotexautomation.com
11. Packaging & storage
When not in use, actuators should be kept in a sealed plastic bag in a cardboard box to
prevent moisture or dust from contacting product.
Actuators should be stored in a dry place free from water and dust.
Store at temperature between 4°C and 49°C (40°F and 120°F).
Locate in an area to avoid damage by impact.
12. Assistance
For technical questions or assistance, contact any authorized distributor of
ROTEX or:
ROTEX MANUFACTURERS AND ENGINEERS PRIVATE LIMITED
Manpada Road, Dombivli (East)-421204
Maharastra, INDIA.
Tel: +91 251 2871033/ 2871390/ 2871196/ 2871989
Fax: +91 251 2871191
aftersales@rotexautomation.com
To find your local ROTEX representative:
For more information about ROTEX and its network, Please visit
www.rotexautomation.com
To Previous Page
Loading...
Need help?
General
