To Next PageTo Next Page
Need help?Do you have a question about the Roth BW/H Komfort HE and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Type | BW/H Komfort HE |
| Voltage | 230 V AC |
| Housing material | Plastic |
| Power consumption | 5 VA |
| Relative humidity | non-condensing |
| Weight | 200 g |
Details the controller's technical specifications like inputs, outputs, power, and dimensions.
Details the steps for physically mounting the controller unit to a wall.
Details the initial setup steps required after connecting or resetting the controller.
Details the function of each of the 7 buttons used for operating the controller.
Explains how to navigate menus and adjust settings using the controller's buttons.
Explains button navigation and initial menu steps like language, scheme, and units.
Covers adjusting daylight savings, time, date, and solar system selection.
Details saving settings and finalizing the controller's initial setup.
Allows adjustment of basic solar system settings.
Allows selection and adjustment of optional solar functions.
Provides access to advanced solar settings and expert functions.
Allows selection of the basic solar system based on stores and collector fields.
Monitors temperature difference and shows warnings if exceeded.
Allows selection and adjustment of optional functions for the system arrangement.
Activates backup heating to prevent Legionella spread in DHW stores.
Configures start temperature, holding temperature, and drying times.
Lists functions enabled by using an SD card (logging, updates, etc.).
Guides on updating the controller's firmware using an SD card.
Addresses issues with pump overheating and lack of heat transfer.
Guides on troubleshooting late pump startup issues.
Addresses intermittent pump operation problems.
Helps diagnose collector circuit heat dissipation issues.
