Use only Roto Zip Tool
Corporation’s recommended
accessories with this tool. Accessories that may
be suitable for one tool, may become hazardous
when used on another tool.
If an extension cord is neces-
sary, a cord with adequate
size conductors that is capable of carrying
the current necessary for your tool must be
used. This will prevent excessive voltage drop,
loss of power or overheating. Grounded tools
must use 3-wire extension cords that have 3-
prong plugs and receptacles.
Zip® Bits
Roto Zip Tool Corporation's patented line of
versatile Zip Bits and accessories provide
you with the flexibility to quickly move from
one material to another and one job to
another, without the hassle of changing tools
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
NOTE: The smaller the gauge number, the heavier
the cord.
Service
Preventive maintenance per-
formed by unauthorized per-
sonnel may result in misplacing of internal
wires and components which could cause
serious hazard. Roto Zip Tool Corporation is the
only authorized repair center for Roto Zip tools.
Contact the Customer Service department, toll
free in the U.S. and Canada, at 1-877-768-6947,
or 1-608-798-3737, Monday through Friday
between 8am-4:30pm CST, for further instruc-
tions.
To avoid accidents always
disconnect the tool from the
power supply before cleaning or performing
any maintenance.
Ventilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects
through openings.
Certain cleaning agents and
solvents damage plastic
parts. Some of these are: gasoline, carbon tetra-
chloride, chlorinated cleaning solvents, ammonia
and household detergents that contain ammonia.
Ref. Part No. Description
No.
Accessories
!
WARNING
Tool’s
Ampere
Rating
Cord Size in A.W.G.
Wire Sizes in mm
2
3-6
6-8
8-10
10-12
12-16
18 16 16 14 .75 .75 1.5 2.5
18 16 14 12 .75 1.0 2.5 4.0
18 16 14 12 .75 1.0 2.5 4.0
16 16 14 12 1.0 2.5 4.0 —
14 12 — — — — — —
25 50 100 150 15 30 60 120
Cord Length in Feet Cord Length in Meters
!
WARNING
!
WARNING
!
WARNING
Maintenance
!
CAUTION
Where Can You Buy Accessories?
The place where you purchased your tool should also carry Roto Zip Tool Corporation’s full line of accessories. Our
products are available at most home improvement centers and hardware stores. If you are looking for a source,
please call our Customer Service representatives Monday through Friday between 8am - 4:30pm (CST) at 1-877-
768-6947 (toll free in the U.S. and Canada) or at 608-798-0139 ext. 520.
ZBSC5
RZ125
RZ250
GP10
ZB10
ZBWD8
FBR250
1 100372 Housing Front Assembly
2 100304 Shaft Lock Assembly
3 100342 Spring
4 100308 Retaining Ring
5 100374 PCB Subassembly
6 100315 Switch
7 100316 Strain Relief (Type 2)
7 100350 Strain Relief (Type 3)
8 100317 Power Cord
9 100318 Divertor Ring
10 100319 Motor Assembly
11 100376 Housing Back Assembly
12 RTM710 Screws
13 100378 Decal Info
14 100379 Decal Product Name
15 SC701 Collet Nut
16 100383 Left Handle Assembly
17 100334 Cam Lock Assembly
18 100337 Storage Cover
19 100345 Wrench Spring
20 100384 Right Handle Assembly
21 100353 Clamp
22 100354 Lever
23 100355 Clamp Link
24 100356 Spring Washer
25 100307 Slide Washer
26 100357 Pivot Pin
27 100359 Base
28 100390 Thumb Screw
29 100363 Plate Nut
30 RTM125 Collet, 1/8”
31 RTM250 Collet, 1/4"
32 100346 Collet Wrench
To Next Page
