To Next PageTo Next Page
Need help?Do you have a question about the ROTONDI EC-289 Series and is the answer not in the manual?
Rules for unattended operation, monitoring, and child safety.
Tips to avoid falls and prevent burns from hot surfaces.
Instructions for switching off, checking wear, and handling malfunctions.
Unpack the iron, check for completeness, and place on a heat-resistant surface.
Connect the power cable and steam hose to the iron and steam generator.
Switch on the iron, set thermostat, and discharge initial steam.
Switch off the iron when ironing is finished or interrupted.
Checks for power supply, wiring, heating element, and thermal fuse issues.
Addresses thermostat failure and thermal cut-off issues for excessive heat.
Checks microswitch, steam generator pressure, solenoid valve, and hose/soleplate blockages.
Adjust thermostat for correct vaporization and manage condensation.
Manage initial smoke and clean the iron/hose with the first steam.
Avoid maximum temperature for longevity and manage cable/hose attachment.
Always use original parts for repairs and ensure correct reassembly.
Ensure all insulators, gaskets are fitted and check for worn parts.
General| Power | 2200W |
|---|---|
| Voltage | 220-240V |
| Frequency | 50/60Hz |
| Weight | 1.2kg |
| Auto Shut-off | Yes |
| Anti-drip System | Yes |
| Self-cleaning Function | Yes |
