Need help?Do you have a question about the ROTOR INspider ALDHU24 and is the answer not in the manual?
General| Type | Power Meter Spider |
|---|---|
| Material | Aluminum |
| Connectivity | Bluetooth Smart & ANT+ |
| Accuracy | +/- 1.0% |
| Battery Life | 200 hours |
| Chainring Options | Oval or Round |
| Power Measurement | Dual-sided |
| Chainring Sizes | 110mm BCD, 130mm BCD |
Describes the spider as containing the power meter unit and Bluetooth/ANT+ sensor ID.
Details ROTOR crank compatibility with various bottom bracket systems and frames.
Explains how to position the spider over the axle and align the OCP reference line.
Describes positioning the drive-side crank arm over the axle and tightening the bolt.
Provides a table for verifying spacer selection for MTB cranks based on frame type.
Provides a table for verifying spacer selection for road cranks based on frame type.
Explains how to pair the power meter with ANT+™ compatible devices.
Details power meter activation and the automatic pairing process via ANT+™.
Explains manual pairing using the INspider's SENSOR ID.
Details pairing with Bluetooth® Smart devices and the ROTOR Power app.
Provides a comprehensive guide for activating, positioning, signaling, and verifying calibration.
Explains how the INspider activates, hibernates, and uses its LED indicator.
Provides specifications of the Lithium-ion battery, estimated riding time, and low battery warnings.
Explains how to connect the magnetic charger to recharge the battery.
Lists the data measured (POWER, CADENCE) and how it's sent to the head unit.
Explains TORQUE360 and its benefit for analyzing pedaling technique.
Defines OCA and its relationship with Q RINGS® and OCP.
States the product's waterproof rating and provides cleaning advice.
Warns against disassembling the power meter to avoid damage and voiding the warranty.
Compiles general product info, compares ROTOR power meters, and lists ANT+ compatibility.
Provides links for ANT+ compatibility and explains Bluetooth® Smart device compatibility.
Lists the items included in the INspider box and provides battery charging instructions.
Addresses temperature effects and reiterates the disassembly warning.
Discusses battery replacement and longevity, advising to contact dealers if needed.
Explains that fast mode (TORQUE 360) increases battery consumption.
Outlines the process for updating the power meter's firmware via ANT+™ or Bluetooth® Smart.
Advises on the frequency of calibration and explains the need for two steps.
Describes expected calibration values and how to verify correct calibration.
Explains the sampling frequency and data transmission rate for power values.
Lists the primary data (Power, Cadence, Balance) provided by the INspider.
Details TORQUE360 and defines OCA, linking them to Q RINGS® and OCP.
Explains how to view TORQUE 360 and OCA data using software or specific cycle computers.
Clarifies that INspider measures cadence internally and recommends removing external sensors.
Guides on resolving ANT+, Bluetooth®, and computer connection issues.
Offers troubleshooting steps for power meter activation and response problems.
Directs users to dealers for parts, warranty, and technical assistance.
Explains the concept of training with power and recommends TrainingPeaks.
Lists recommended software for analyzing power meter data.
Details the 2-year warranty policy, exclusions, and warranty service requirements.
Presents FCC and Industry Canada compliance statements and measures to correct interference.
States compliance with EU directives and provides a link to the declaration of conformity.
Outlines Canadian regulatory statements regarding device operation and RF exposure limits.
To Next Page
