Need help?Do you have a question about the ROTOR INspider ROT117 and is the answer not in the manual?
General| Type | Power Meter |
|---|---|
| Power Measurement | Yes |
| Cadence Measurement | Yes |
| Data Transmission | ANT+ and Bluetooth Smart |
| Water Resistance | IPX7 |
| Measurement Range | 0-2000W |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Compatibility | ANT+, Bluetooth Smart |
| Resolution | 1 watt |
| Display | No |
| Accuracy | +/- 1.5% |
Introduces the INspider power meter unit and its components.
Steps for positioning the spider over the axle and aligning the OCP line.
Instructions for installing the drive side crank arm onto the axle and spider.
Guide for selecting appropriate spacers for MTB cranksets based on frame type.
Guide for selecting appropriate spacers for road cranksets based on frame type.
Instructions for pairing the power meter with ANT+™ compatible devices.
Instructions for pairing with Bluetooth® Smart devices and the ROTOR Power app.
Detailed steps for performing the power meter calibration.
Details about the Lithium-ion battery, capacity, and riding time.
Instructions on how to recharge the power meter's battery.
Explains the data measured: Power, Cadence, and Balance.
Explains the TORQUE 360 feature and its relation to pedaling technique.
Defines OCA (Optimum Chainring Angle) and its link to Q RINGS®.
Details compatibility with the ROTOR Power app and its features.
Compares INpower, 2INpower, and INspider, and lists compatibility.
Frequency and reasons for calibrating the power meter.
Details on how power values are shown and data provided by INspider.
Addresses common issues like ANT+ device detection and Bluetooth connection.
Explains training with power and recommended software for data analysis.
Details the warranty terms and conditions for ROTOR products.
EU compliance and declaration of conformity.
Canadian regulatory statements for radio equipment.
To Next Page