EasyManua.ls Logo

ROTOR Vitamat Power 230 V - User Manual

Default Icon
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
REP-RVP-1110-2-DE-EN-FR Art.no. 1075.082 07.2006
Vitamat Power Juicer 230V/120V
RVP
Saft-Zentrifuge • Juice extractor • Centrifugeuse pour jus
DE
EN
FR
Reparaturanleitung 2
Ersatzteilliste 12
Repair instructions 2
Spare parts list 12
liste de pièces de détachéses 12

Table of Contents

Questions and Answers

  • J
    johnstongordonAug 22, 2025
    What to do if my ROTOR Juicer motor has overspeed (more than 7000rpm)?
    • E
      Emily LeonardAug 22, 2025
      If the motor in your ROTOR Juicer is running at overspeed (more than 7000rpm), it could be due to a few reasons: The commutator might be very dirty, or the speed sensor magnet could be defective. Another possibility is a defective electronic board. To resolve this, try replacing the carbon brushes and cleaning the commutator, replacing the speed sensor magnet, or changing the electronic board.
  • J
    Jason KingAug 31, 2025
    How to fix a ROTOR Juicer when the motor doesn't run?
    • M
      Miguel BondAug 31, 2025
      If the motor of your ROTOR Juicer isn't running, there are several potential causes. First, check if there's a supply voltage or low voltage and replace the fuse if necessary. The protective switch might have turned off the motor due to an overload; in that case, cool down the machine and restart it. It's also possible that the protective switch is defective and needs replacement. A broken cable strand at the connecting terminal on the electronic board could be the issue; strip the cable and reconnect it. Lastly, the safety switch might be defective, requiring replacement.
  • K
    Kimberly YoderNov 10, 2025
    Why is my ROTOR Vitamat Power 230 V making unusual noise or vibrations?
    • D
      David GarciaNov 10, 2025
      If your ROTOR Juicer is making unusual noises or vibrating, it could be due to several reasons. The basket might be deformed from a heavy impact or improper cleaning; in this case, replace the basket or soak it in water daily. It could also be caused by poor pulp discharge from drier materials or soft produce, indicating the machine needs more cleaning. Other potential causes include incorrect assembly of the basket, a missing O-ring, loose or dirty ball bearings, misalignment of the motor, a swinging clutch, a lock washer on the motor shaft, the iron bolt touching the speed sensor, overspeed due to a dirty commutator, the fan touching the base plate, or the base plate touching the motor housing. Addressing these issues involves actions such as replacing parts, cleaning, or adjusting compo...

ROTOR Vitamat Power 230 V Specifications

General IconGeneral
BrandROTOR
ModelVitamat Power 230 V
CategoryJuicer
LanguageEnglish