T
Timothy ColeAug 3, 2025
How often should I replace the Rotork Control Unit actuator battery?
- SSteven HansenAug 3, 2025
The actuator battery in your Rotork Control Unit should be replaced every 3 years.
To Next PageTo Next PageHow often should I replace the Rotork Control Unit actuator battery?
The actuator battery in your Rotork Control Unit should be replaced every 3 years.
What permission is required before battery removal or replacement in a hazardous area for Rotork Control Unit?
Before removing or replacing the battery in a hazardous area, you must obtain permission, such as a 'hot work permit', or follow other local regulations.
Where is the battery located in rotork IQT3 Control Unit for replacement?
Access to the battery for replacement in your Rotork Control Unit is available via a labelled sealing plug located on the main gearcase.
What to do if oil is removed or lost from rotork IQT3 actuator?
If the oil is removed or lost from your Rotork Control Unit actuator, it must not be electrically operated to prevent premature failure.
Details about the Rotork Bluetooth® Setting Tool Pro (BTST) and its capabilities for setup and missions.
Specific conditions for ATEX/IECFM certified actuators, including warnings for external enclosure fasteners.
Explanation of alarm icons and text displayed for general and battery alarms.
Information on battery status detection and display of low or discharged battery warnings.
Steps for securing the actuator to the valve, including torque specifications.
Step-by-step guide on how to connect to the actuator using the Rotork Bluetooth® Setting Tool Pro.
Details on the default security password and how to manage settings access.
Overview of the main settings menu structure for actuator configuration.
Configuration of open and close limits for the actuator, including factory defaults.
Details about the Rotork Bluetooth® Setting Tool Pro (BTST) and its capabilities for setup and missions.
Specific conditions for ATEX/IECFM certified actuators, including warnings for external enclosure fasteners.
Explanation of alarm icons and text displayed for general and battery alarms.
Information on battery status detection and display of low or discharged battery warnings.
Steps for securing the actuator to the valve, including torque specifications.
Step-by-step guide on how to connect to the actuator using the Rotork Bluetooth® Setting Tool Pro.
Details on the default security password and how to manage settings access.
Overview of the main settings menu structure for actuator configuration.
Configuration of open and close limits for the actuator, including factory defaults.
General| Environmental Protection | IP68 |
|---|---|
| Communication Protocols | Foundation Fieldbus |
| Operating Temperature | +70°C |
| Display | LCD |
| Control Signal | 4-20mA |
