13
7
[B] button:
At standby mode, press the [B] button to select the treatment body part.
8
9
[-] button:
At standby mode, press the [-] button to decrease the CH1 and CH2
output intensity;
At the key locking mode, press the [-] button to unlock the keys.
10 Output socket
4. SPECIFICATION
4.1Technical information
Device name Combo Electrotherapy Device
Model/type R-C1
Power sources 3.7 V Li-ion battery
Power supply Input: 100-240V AC, 50/60Hz,0.2A; Output: 5V
DC, 300mA
Output channel
Dual channel
Waveform Bi-phase square-wave pulse
Treatment mode: TENS, and EMS
Operating condi-
tion
5° C to 40° C with a relative humidity of 15%-93%,
atmospheric pressure from 700 hPa to 1060 hPa
Storage condition -10° C to 55° C with a relative humidity of 10%-
95%, atmospheric pressure from 700 hPa to
1060 hPa
Dimension 120.5x69.5x27 mm (L x W x T)
Weight About 115g
1 minute
BF type applied part, internal power equipment, IP22
[S] button:
At the standby mode,press the [S] button to enter the setting m ode
11 Belt clip
To Next Page
Loading...