User manual
15
To save the details of your current position, select My
position.
To save the details of the cursor, select Cursor position.
Define road block
To avoid parts of the current route, select Define road block.
This option is accessible only during navigation!
Turn GPS on / Turn GPS off
To enable or disable the GPS functionality, select Options >
Tools > Turn GPS on / Turn GPS off.
If the GPS is disabled and you intend to start a navigation, the
Turn GPS on? message is displayed. Select Yes and start
navigating. Select No and remain in the previous status.
If you select Turn GPS off during navigation, the Stop current
navigation? message is displayed. Select Yes and interrupt
the current navigation. Select No and continue the navigation.
Settings > General
To set the overall behaviour of the application, select Options
> Tools > Settings > General.
To set the sound intensity, select Volume. To create a
correlation between sound level and cruising speed, select
Dynamic volume.
To set the language of the application, select Interface
language
To set the language of the voice guidance, select Voice
Language. Select a human voice or a computer (synthesized)
voice.
To set the screen illumination, select Backlight.
To set the system of measurement, select Units.
To display or skip the legal text when you start the application,
select Show disclaimer.
To automatically establish an internet connection each time
you start the application, select Go online > Allow always.
To Next Page
Loading...