ROUTE 66 MAPS - Extras

User manual
8
2. To drive to your destination, select Drive to. On-screen
instructions and spoken instructions are provided.
 To buy and use this licence, first buy the Drive and walk
licence.
3. Select the route type: Fastest (car) or Shortest (car).
4. View the route preview and then select OK and start
driving.
Voice guidance and on-screen instructions are available.
To change the language of the voice guidance, select
Options > Tools > Settings > General > Voice language.
To adjust the volume of the voice instructions, use the buttons
of the device or select Options > Settings > General >
Volume and Dynamic volume.
To add an intermediary destination to your navigation in
progress, select the second place and then select Drive via.
To avoid a route section ahead, select Define road block and
specify the road length to be avoided. The route is
automatically recalculated.
To change the amount of on-screen instructions, select
Options > Show shortcuts > Next layout or press 0 on the
phone keypad. To stop driving, select Stop.
 You can start driving only after you buy a navigation
licence from the online store. Refer to the Extras >
Navigation section for details.
Extras
To buy additional services and content, select Options >
Extras.
 A network connection is required. To manage your network
settings, select Options > Tools > Settings > General >
Go online.
 An access point is required. To define an access point,
select Options > Tools > Settings > Extras > Access
point.
 We advise you to use the ROUTE 66 Sync home
application. The transfer speed is much higher. Refer to
the Using ROUTE 66 Sync section for details.