User manual
17
To choose the car type you prefer, select Car type >
Personal car or Lorry. For heavy vehicles, access restrictions
may be imposed on certain road types or segments.
To choose your default method of navigation, select Travel
mode > Fastest (car) or Shortest (car). To pick yourself the
travelling method each time you start a navigation, select
Travel mode > Ask always.
To display more or less information, select Navigation Bar
Content.
To display in the navigation bar Remaining travel time or
Estimated arrival time, select Time indicator.
To see a route preview before starting the navigation, select
Route overview.
To view additional information when approaching street
junctions, select Lane information.
To set a transparency effect for the navigation bar, select
Navigation Bar Transparency.
To exclude motorways, tax roads, ferryboats or water
crossings from your routes, select Avoid motorways, Avoid
toll roads, or Avoid ferries.
To automatically zoom in when your cruising speed
decreases, and to automatically zoom out when your cruising
speed increases, select Automatic zooming.
Settings > Speed
To set the speed values you prefer for all types of roads,
select Options > Tools > Settings > Speed. Here you can
also set alarms.
View the assigned speed for all road types. If necessary,
specify a different speed.
Slider* - Increase or decrease the speed of all road types.
To set your maximum cruising speed, select Alarm speed
and specify a value. When you drive and reach this speed,
you are warned. To choose the method of warning (acoustic /
visual), select Alarm type.
To Next Page
Loading...