Router Technologies Router Raizer RZ100 - User Manual

RZ 100
For Parts or Installation Assistance Contact
INC.
phone: 1-866-266-1293
fax: 1-515-266-2122
2729 Delaware Ave, Des Moines, IA. 50317
1
2
3
Craftsman DeWalt
DW 625
DeWalt
DW 621
Hitachi
M12V
Hitachi
TR12
Makita
3612
Porter Cable
6931
Porter Cable
7538 / 7539
Porter
Cable
Ryobi
RE 600
7529 / 8529
© 2000-2005 Router Technologies
All Rights Reserved
Installation Instructions:
Visit our Website @
www.routertechnologies.com
Craftsman 27505-27506-27510-27511 -- ( 8-9-10 )
De Walt DW 625 & ELU 3337- 3338-3339 -- ( 11-12-13 )
De Walt DW 621 -- ( 14-15-16 )
Freud FT 2000 -- ( 17-18-19 )
Hitachi M12V -- ( 20-21-22 )
Hitachi TR12 -- ( 23-24-25 )
Makita 3612 Series -- ( 26-27-28-29 )
Porter Cable 6931 Plunge Base -- ( 30-31-32-33-34-35 )
Porter Cable 7538 / 7539 -- ( 36-37-38 )
Porter Cable 7529 / 8529 -- ( 39-40-41 )
Ryobi RE 600 -- ( 42-43-44 )
Ryobi RE 500 -- ( instructions available on our website )
TO AVOID CONFUSION DURING INSTALLATION
follow steps 1 through 5 listed below
Router Install Pages
Step 1. Remove pages 2 through 7 from book
Step 2. Remove your router install pages
Step 3. Return extra pages to box
Step 4. For smoothest plunging action purchase
STP® before installation. SEE PAGE 2
Step 5. See page 3 for parts diagram
Craftsman is a registered trademark of the Sears, Roebuck and Co. Corporation
DeWalt is a registered trademark of the Black and Decker Corporation
ELU is a registered trademark of the A.G. Corporation
Freud is a registered trademark of Freud USA Ltd
Hitachi is a registered trademark of the Hitachi Ltd Corporation
Makita is a registered trademark of the Makita Electric Works Corporation
Porter Cable is a registered trademark of the Porter Cable Corporation
Ryobi is a registered trademark of the Ryobi Ltd Corporation
Freud
FT 2000

Router Technologies Router Raizer RZ100 Specifications

General

Brand	Router Technologies
Model	Router Raizer RZ100
Category	Power Tool
Language	English

Summary

Router Raizer Model Compatibility

Router Install Page Guide

Lists specific router models and corresponding installation pages within the manual.

Metric Equivalents and Customer Information

Owners Responsibility and Safety

Outlines owner's duties, safety warnings, and precautions for using the Router Raizer.

Limited Two Year Warranty

Details the warranty coverage, terms, and conditions for the Router Raizer product.

Pre-Installation Procedures

STP Lubrication for Plunge Action

Instructions for applying STP motor oil treatment to plunge posts for smooth operation.

Plunge Post Boots Information

Guidance on using or omitting rubber boots for plunge posts during installation.

Router Raizer Parts Diagram

Full Size Parts Illustration

Visual guide showing all Router Raizer components at their actual size for identification.

Router Table Installation: Access Hole and Method 1

Using the Locating Pin

How to use the #46 locating pin to mark the router access hole location.

Method 1: 3;4-Inch Pocket Drilling

Detailed steps for drilling a 3/4-inch pocket for table mounting on insert plates.

Router Table Installation: Methods 2 & Dust Cover

Method 2 A: Black Rubber Spacer Installation

Instructions for using the provided rubber spacer for router table mounting.

Method 2 B: Original Sub Base Installation

Procedure for mounting the router using its original sub-base plate.

Installing Dust Cover Insert and Cover

Guide for fitting the dust cover insert and dust cover into the router table insert.

Drilling Templates and Troubleshooting

Using Paper Drilling Templates

Instructions on how to use paper templates for accurate drilling of router table holes.

Router Raizer Troubleshooting Guide

Solutions for common issues like raising problems, hard operation, and depth limitations.

Router Raizer Operation and Adjustments

Using Router Raizer in Tabletop Setup

Instructions for operating the Router Raizer when mounted in a router table.

Using Router Raizer Handheld

Guidance on using the Router Raizer for handheld operation with plunge capabilities.

Adjusting Router Height and Rotation Direction

Details on adjusting router height and understanding rotation directions for adjustments.

Transporting and Storing the Router

Recommendations for safely transporting or storing the router with the Raizer installed.

Makita 3612 Series Installation

Preparing Motor Housing for Makita 3612

Steps to prepare the motor housing of the Makita 3612 for Router Raizer installation.

Preparing Base for Makita 3612

Instructions for preparing the base of the Makita 3612 for Router Raizer installation.

Makita 3612 Series Reassembly

Reassembling Router for Makita 3612

Guide for reassembling the Makita 3612 router with the installed Router Raizer.

Sub-base Plate or Router Table Insert Installation

Specific instructions for installing the Router Raizer onto sub-base or table inserts.

Makita 3612 Series Drilling Template

Drilling Template for Makita 3612

Template guide for drilling mounting holes for the Router Raizer on Makita 3612.

Makita 3612 B Drilling Template

Drilling Template for Makita 3612 B

Template guide for drilling mounting holes for the Router Raizer on Makita 3612 B.