Need help?Do you have a question about the ROVE MyDash R2-4K and is the answer not in the manual?
General| Resolution | 4K |
|---|---|
| GPS | Yes |
| Wi-Fi | Yes |
| Screen Size | 2.4 inches |
| Night Vision | Yes |
| G-Sensor | Yes |
| Parking Mode | Yes |
| Aperture | f/1.8 |
| Loop Recording | Yes |
| Video Resolution | 3840x2160 |
| Storage | MicroSD up to 512GB |
| Field of View | 150 degrees |
Provides essential safety instructions and precautions for using the ROVE R2-4K dash cam to avoid accidents or damage.
Instructions for charging the ROVE R2-4K dash cam for the first time use and during operation.
Selection of video resolutions, from 4K down to 720p, affecting quality and storage space.
Setting the duration for loop recording (3, 5, or 10 minutes) or turning it off.
Configures motion detection to record only when movement is detected in the camera's view.
Sets up parking mode to automatically record when the camera detects shaking while parked.
Sets the sensitivity of the G-sensor to detect impacts and protect video files.
Manage recorded files by deleting individual videos/photos or all files on the card.
Protect important video and photo files from being overwritten by loop recording.
Connect your smartphone via Wi-Fi to the dash cam for viewing and control.
Option to format the microSD card, which will erase all data.
Reset all camera settings to their original factory default values.
Solutions for camera not turning on and 'Card Full' error messages.
Troubleshooting freezing, fuzzy video, and overheating issues.
Fixes for frequent power cycles and missing oldest video files.
Addressing automatic video locking and issues with microSD card insertion.
Solutions for lagging video playback on a computer due to file bitrate.
To Next Page
