It is important to understand that complete elimination of the
white paper's reflection/glare may not always be possible
due to its inherent characteristics and lighting conditions.
This example serves as a reference to fine-tune your CPL's
adjustment according to your preference.
NOTE
STEP 9:
ADJUSTING FOR GLARE REDUCTION - ROTATING THE FRONT PART
Focus on the dash cam display and gradually rotate the front side
of the CPL filter. Watch for any glare caused by the reflection from
the white paper in the viewfinder. Continue rotating the filter until
the glare is significantly reduced or disappears. Experiment with
different angles to find the optimal position that effectively
reduces glare while maintaining image quality.
STEP 10: TEST THE CPL FILTER
Remove the white piece of paper. Take a few test recordings in
different lighting conditions to ensure the CPL filter is providing
the desired glare reduction and enhancing overall video quality.
13
USER MANUAL
To Next Page
Loading...
