180
Bulb Replacement
To replace the fastener, push on the pointed end (arrowed in
illustration ‘A’) until the centre protrudes from the collar (as
illustration ‘B’).
Insert the fastener through the moulded luggage compartment
lining and into the hole in the body, then push the centre of the
fastener (as arrow 'B') until it locks (flush with the collar).
REAR LIGHTS (5 door models)
From inside the luggage compartment, remove the fastener
(illustrated in inset) and pull back the moulded lining as shown.
To remove the fastener, use a pointed tool to push in the centre
(see inset) - the fastener can then be easily extracted from the
moulded lining.
Take care to avoid any contact with a hot exhaust system,
when carrying out any maintenance at the rear of the car.
HB0195
B
A
HB0188
To Next Page
Loading...
