Trip Computer
76
Trip Computer
TRIP COMPUTER* - FUNCTION SELECTION
The trip computer utilises the message centre on the highline
instrument pack only and provides valuable information to
assist the driver to calculate fuel stops, journey times and
distances.
When the starter switch is in the second position, the different
trip computer functions can be selected by pressing the button
on the end of the left-hand column stalk. Repeated pressing
of the button causes the display to scroll through the
following possible selections.
•
Trip distance 2
•
Distance to tank empty (‘range’)
•
Average fuel consumption
•
Average speed
•
Overspeed (speed limit)
By pressing and holding the button for longer than 2 seconds,
the selected display can be reset (not ‘range’).
H2802
To Next Page
Loading...
