Seats
32
Lumbar support adjustment
Press the upper button to increase, and the
lower button to reduce, lumbar support.
Head restraint adjustment
Raise or lower the switch, until the head
restraint is level with the back of the head.
WARNING
Head restraints are designed to support the
back of the head (NOT THE NECK) and to
restrain rearward movement of the head in
the event of a collision. The restraint must
be positioned level with the head to be
effective.
Do not drive, or carry passengers with the
head restraints removed.
Seat back adjustment
Twist the switch forward or backward, until
the desired seat back angle is achieved.
WARNING
DO NOT allow occupants to travel with the
seat backs reclined steeply rearwards.
Optimum benefit is obtained from the seat
belt, with the seat back angle set to 15
degrees from the upright (vertical) position.
Folding armrests
An adjustable folding armrest is fitted to the
inboard side of the front seats.
Pull the armrest down into the horizontal
position, then turn the knob at the end of the
armrest to set the desired angle.
To Next Page
Loading...
