Interior equipment
81
LOADSPACE COVER
Fold the rear loadspace cover by pushing
upward and forward (arrowed) into the
vehicle. Lay the rear section of the cover on
the forward section.
The loadspace cover can be removed by
pulling on the rear to disengage it from the
side spigots and stored in the forward area of
the loadspace; a channel is formed in both of
the loadspace side panels immediately behind
the rear seats to accommodate the folded
loadspace cover.
WARNING
DO NOT carry luggage or loose items on the
loadspace cover - these may obscure vision
and could become dangerous projectiles in
the event of a sudden stop or collision.
All equipment, luggage or tools carried in
the load area should be secured to minimise
the risk of injury to the driver and
passengers in the event of an accident or
emergency manoeuvre.
To Next Page
Loading...
