To Next PageTo Next Page
Need help?Do you have a question about the Rover T Series and is the answer not in the manual?
Explanation of the engine's lubrication flow and components.
Step-by-step instructions for removing the camshaft timing belt.
Guidance on inspecting the timing belt and tensioner spring for wear and condition.
Procedure for refitting and adjusting the timing belt tension and timing marks.
Step-by-step instructions for removing the inlet manifold.
Instructions for removing the exhaust manifold from the cylinder head.
Detailed steps for removing the cylinder head assembly.
Procedure for removing camshaft covers and the cylinder head.
Steps for removing camshafts from the cylinder head.
Steps for inspecting camshafts, bearing journals, and checking bearing clearance.
Instructions for removing valve springs, caps, collets, and valves.
Procedures for removing carbon deposits, checking valve stem/head diameters, and installed height.
Instructions for removing and fitting new valve guides into the cylinder head.
Methods for inspecting the oil pump assembly for wear and proper clearances.
Instructions for assembling the oil pump and its relief valve components.
Procedure for refitting the oil pump assembly, including sealant and bolts.
Steps for removing pistons and connecting rod assemblies from the cylinder bores.
Instructions for refitting the crankshaft, main bearing shells, and thrust washers.
General