ROWAN ELECTRIC APPLIANCE HZB-20DN

Questions and Answers

E
edwardsmarkAug 3, 2025
Why is my ROWAN ELECTRIC APPLIANCE HZB-20DN Ice Maker making ice too slowly?
- W
  williammontesAug 3, 2025
  Your ROWAN ELECTRIC APPLIANCE Ice Maker might be producing ice slowly due to several reasons. The hot air outlet may be blocked, ensure it has at least 15 cm of clear ventilation space. Also, the water temperature in the inner tank might be too high; it should be between 7?-32?. If these aren't the issue, the refrigeration system may have a malfunction, which requires verification by a qualified technician.
K
Karen PottsAug 8, 2025
What to do if the “Add Water” indicator lights up on my ROWAN ELECTRIC APPLIANCE Ice Maker?
- K
  Kimberly GillAug 8, 2025
  If the “Add Water” indicator is illuminated on your ROWAN ELECTRIC APPLIANCE Ice Maker, it means the unit lacks water. To resolve this, stop the ice maker, add water, and then press the “ON/OFF” button to restart it.
K
Kristina JacobsAug 12, 2025
What to do if the “ Ice” indicator lights flashes and the button turns red on my ROWAN ELECTRIC APPLIANCE Ice Maker?
- A
  Amanda FoxAug 12, 2025
  If the “Ice” indicator light flashes and the button turns red on your ROWAN ELECTRIC APPLIANCE Ice Maker, it could be due to a few reasons. The ambient or water temperature might be too high; ensure the ambient temperature is below 90 Fahrenheit degrees and use colder water. Alternatively, there may be refrigerant liquid leakage. In this case, press the ICE button twice to restart the ice-making program. If the problem persists, a qualified technician should verify the issue. The cover motor could also be broken or the pipe in the cooling system could be blocked.
S
sdixonAug 16, 2025
What to do if my ROWAN ELECTRIC APPLIANCE HZB-20DN is leaking water?
- B
  Briana BradfordAug 16, 2025
  If your ROWAN ELECTRIC APPLIANCE Ice Maker is leaking water, first ensure that the drain plug is securely in place. If the leakage continues, a pipe joint in the appliance may be loose, or the seal may have reached its service life. In both of these cases, you should have the unit verified by a qualified technician.
T
tanya71Aug 20, 2025
Why is the “Ice Full” indicator lighting up on my ROWAN ELECTRIC APPLIANCE Ice Maker?
- M
  Marco KingAug 20, 2025
  The “Ice Full” indicator on your ROWAN ELECTRIC APPLIANCE Ice Maker lights up because there is too much ice. Remove some ice cubes. If the indicator is on, but there are no ice cubes, a qualified technician should verify the unit.
T
Troy MitchellAug 25, 2025
What does it mean if the “ Ice” indicator light flashes on my ROWAN ELECTRIC APPLIANCE HZB-20DN?
- J
  jonesbrianAug 25, 2025
  If the “Ice” indicator light is flashing on your ROWAN ELECTRIC APPLIANCE Ice Maker, it means the system is under repair. It should automatically resume working. If this issue happens often, clean the machine thoroughly.
M
mary07Aug 29, 2025
What does it mean if “ Ice” & “ Add Water” indicator lights flash and the button turns red on my ROWAN ELECTRIC APPLIANCE HZB-20DN?
- A
  Alexis MorrisAug 29, 2025
  If the “Ice” and “Add Water” indicator lights flash and the button turns red on your ROWAN ELECTRIC APPLIANCE Ice Maker, it indicates that the water pump, float switch, or water valve isn't working. A qualified technician should verify this.