This document is an instruction manual for an ICE CREAM MAKER, specifically model number ICE0830, with item number IC3908.
Function Description
The device is an ice cream maker designed for home use, allowing users to create various frozen desserts like ice cream, sorbet, and frozen yogurt. It operates with a knob-controlled system, offering simple and reliable operation. The machine features quick freezing ice cream production methods and is designed with detachable parts for easy cleaning and maintenance.
The control panel includes options for:
- Power Off: Turns the device off.
- Single mixing mode: Activates the mixing function without refrigeration.
- Single refrigeration mode: Activates the cooling function without mixing.
- Ice cream mode: Activates both mixing and refrigeration simultaneously to make ice cream.
The knob control functions include:
- Single mixing mode: To set the working time and turn the knob to the single mixing mode. When the time or hardness reaches the preset value, there will be 10 beeps to remind that the mixing is completed. After completion, the knob should be turned to other positions before any other operations.
- Single refrigeration mode: To set the working time and turn the knob to the single refrigeration mode. The compressor and cooling fan are started to realize the refrigeration function. After completion, there will be 10 beeps to remind that the refrigeration is completed. After completion, the knob should be turned to other positions to carry out other operations.
- Ice cream mode: To set the working time and turn the knob to the ice cream mode. The compressor, mixing motor, and cooling fan start to make ice cream. When the time or hardness reaches the set value (indicating that the ice cream is completed), there will be 10 short beeps. At this time, if there is no other operation, it will enter the insulation function automatically, and 10 short beeps will appear after the insulation is completed.
The device also incorporates several self-protection functions:
- Motor Self-Protection Function: The motor has an overcurrent protection function. If the hardness of the ice cream reaches the set value, it will stop automatically. In ice cream mode and single mixing mode, if the motor components are not installed in place, a buzzer will sound for 30 seconds, which will last for 10 times. If the motor components are not installed in place after that, the machine will enter standby state.
- Compressor Self-Protection Function: After switching from ice cream mode or single refrigeration mode to shutdown mode, or if it is switched back to ice cream mode or single refrigeration mode again, the compressor has a protection time of about 3 minutes. However, after unplugging the power line, if the machine is restarted, the default setting is to restart the machine. At this time, there is no delay when selecting ice cream mode or single refrigeration mode again.
- Controlling the Volume of the Ingredients: To avoid overflow or waste, the ingredients should not exceed 60% of the capacity of the removable bowl (Ice cream expands when formed).
The manual provides recipes for various ice cream types, including Basic Ice Cream, Vanilla Ice Cream, Basic Chocolate Ice Cream, Fresh Strawberry Ice Cream, Fresh Lemon Sorbet, and Chocolate Frozen Yogurt.
Important Technical Specifications
- Item no: IC3908
- Model no: ICE0830
- Capacity: 0.8L
- Voltage: 110-120VAC/60Hz
- Anti-shock protection class: I
- Climate type: N/SN
- Power consumption: 100W
- Max overall dimensions: 315 (W) X 235 (D) X 211 (H) mm
- Max Packing Dimensions: 395 (L) X 313 (W&D) X 258 (H) mm
- N.W: 6.3kg
- G.W: 6.8kg
Usage Features
The ice cream maker consists of a motor, transparent lid, mixing blade, loading bowl, housing, and base.
To use the device:
- Preparation: Thoroughly clean all parts that will contact with ice cream before use, including the cooling bowl, loading bowl, mixing blade, transparent lid, etc. Ensure the power cord is disconnected from the outlet.
- Insert Loading Bowl: Put the loading bowl into the ice cream machine, ensuring both ends of the loading bowl handle are aligned with the groove of the upper cover.
- Install Transparent Lid and Motor Assembly: Install the transparent lid and motor assembly.
- Install Mixing Blade: Install the mixing blade, transparent lid, and motor assembly.
- Lock Components: Put the components installed in step 4 into the ice cream machine, making sure that the center of the convex hull of the loading bowl and the motor components of the mixing fan blade are in the same straight line. Lock the components clockwise, and make sure that the triangle mark on the components rotates to the "LOCK" mark.
- Select Mode: Plug in the power and turn the knob to select the ice cream mode.
- Finish: When ice cream making is finished, turn the knob back to the "OFF" position.
- Remove Components: Turn the transparent lid and motor assembly anticlockwise. When the triangle mark is aligned with the unlocking mark, take out the assembly and then take out the loading bowl.
Important Notices for Use:
- Always follow basic safety precautions when using an electrical appliance to reduce the risk of fire, electric shock, and/or injury.
- Read all instructions before using.
- Ensure the voltage is compliant with the voltage range stated on the rating label, and ensure the earthing of the socket is in good condition.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This appliance can be used by children over the age of 8 and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- This appliance is intended to be used in households and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non-retail applications.
- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- When positioning the appliance, ensure the supply cord is not trapped or damaged.
- Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
- The plug must be removed before cleaning, maintaining or filling the appliance.
- Do not upend this product or incline it over a 45°C angle.
- To protect against risk of electric shock, do not pour water on cord, plug and ventilation, immerse the appliance in water or any other liquid.
- Unplug the appliance after using or before cleaning.
- Keep the appliance 8cm from other objects to ensure good heat releasing.
- Do not use accessories which are not recommended by Manufacturer.
- Do not use the appliance close to flames, hot plates or stoves.
- Do not switch on the power button frequently (ensure 5min. interval at least) to avoid the damage of compressor.
- Metal sheets or other electric objects are not allowed to be inserted into the appliance to avoid fire and short circuit.
- When taking out the ice cream, do not knock the barrel or edge of barrel to protect the barrel from damage.
- Do not switch on the power before install well the barrel or blender blade.
- The initial temperature of the ingredients is 20±3°C. Do not put the ingredients into freezer for pre-freeze, as it will easily make the blender blade blocked before the ice cream is in good condition.
- Do not remove the blender blade when the appliance is on working.
- When you turn the ice cream maker on without adding ice cream ingredients, you will slightly hear the mixing paddle scratching the loading bowl, which is a normal phenomenon.
- There are two round copper sheets at the motor assembly of the transparent cover installed on the upper cover. When using, please wipe the water stains on the transparent cover and on the copper plates. If the machine is in use, the two copper plates will be connected by water, which will lead to power failure of the motor. Pull out the power line, wipe the water stains, and restart it.
- Do not use outdoors.
- Never clean with scouring powders or hard implements.
- Please keep the instruction manual.
Maintenance Features
Caution: The plug must be removed before cleaning to avoid electric shock.
- Mixing Blade: Take out the mixing blade, wipe it with a dampened cloth.
- Removable Bowl: Take out the removable bowl, clean it with a dampened soft cloth.
- Transparent Lid and Refill Lid: Wipe the transparent lid and refill lid with a dampened cloth.
- Body and Other Places: Remove the dirty on the body or other places with a dampened cloth, and do not pour water on cord, plug and ventilation, immerse the appliance in water or any other liquid.
- Drying: Allow drying thoroughly with a dry cloth, then return the component to the home position.
Common Problem & Solutions:
| No. | Existing problems | Reason analysis
To Next Page
Need help?
General
