What to do if my ROWAN ELECTRIC APPLIANCE OL-BA010B-05CD/E Air Conditioner works with reduced capacity?
If your ROWAN ELECTRIC APPLIANCE Air Conditioner isn't working at full capacity, try these steps: * Clean the air filter. * Remove any obstacles blocking the airflow. * Keep doors and windows closed. * Set the mode and temperature correctly, as described in the manual. * Ensure the exhaust hose is securely attached.
What to do if my ROWAN ELECTRIC APPLIANCE Air Conditioner is making excessive noise?
If your ROWAN ELECTRIC APPLIANCE Air Conditioner is excessively noisy: * Place the unit on a level and stable surface. * Ensure all parts are securely tightened. Note that some noise from flowing refrigerant is normal.
What to do if my ROWAN ELECTRIC APPLIANCE OL-BA010B-05CD/E displays error codes?
If your ROWAN ELECTRIC APPLIANCE Air Conditioner is showing error codes, here are some possible causes and solutions: * For communication faults between the main PCB and display PCB, check the wire harness of the display PCB for damage. * If there's an ambient temperature sensor failure, check the connection or replace the sensor; clean or replace the temperature sensor. * For coil temperature sensor failures, check the connection or replace the sensor; clean or replace the temperature sensor. * If you get a condensate water high level alarm, empty the drain pan by removing the rubber plug.
Why is my ROWAN ELECTRIC APPLIANCE Air Conditioner not operating?
If your ROWAN ELECTRIC APPLIANCE Air Conditioner isn't operating, make sure the power cord is securely inserted into the wall outlet. Also, empty the drain pan by removing the rubber plug. The operating temperature should be between 41-95 degrees.
What to do if ROWAN ELECTRIC APPLIANCE Air Conditioner has water leakage?
If your ROWAN ELECTRIC APPLIANCE Air Conditioner is leaking water, be sure to empty the water tank before moving it. Also, straighten the hose to prevent any water traps from forming.
Guidelines for safe operation, including power, water, and environmental considerations.
Crucial safety measures for servicing, including area checks, work procedures, and ignition sources.
Detailed instructions on connecting the exhaust hose for proper venting.
Covers unit startup/shutdown, operation modes, timer, defrost, and overload protection.
Instructions for manual and continuous water drainage, including preventing spillage.
General| Brand | ROWAN ELECTRIC APPLIANCE |
|---|---|
| Model | OL-BA010B-05CD/E |
| Category | Air Conditioner |
| Language | English |
To Next Page
