9
EN
With your appliance switched on you can define:
- The ventilation speed (button C)
- The target humidity rate (button B)
And on models DH4116, DH4120 and DH4130, select:
- The drying clothes function (button D)
- The Swing function (button E)
=> Then select the number of hours of operation required before automatic shutdown by pressing
the “PROG/TIMER" key (F).
The indicator light (G) will be lit up for the entire duration of the programmed operation.
The appliance will automatically switch off at the end of the selected time.
PLEASE NOTE: the appliance will regulate itself automatically to maintain the target humidity rate
during the period of operation.
If you wish to exit the program, select “00 H” or stop the appliance with button A; the light will
switch off.
• Fonction PROG
This function allows you to set your appliance for deferred start-up from 1 to 24 hours in previously
defined conditions.
With your appliance switched off, press the "PROG/TIMER" key (F) as many times as necessary to
define the number of hours before automatic start-up.
Your appliance is programmed for continuous start-up but, at your convenience, you can also select:
- The speed (button C)
- The target humidity rate (button B)
And on models DH4116, DH4120 and DH4130:
- The drying clothes function (button D)
- The Swing function (button E)
The indicator light (G) will be lit up awaiting automatic operation of the appliance.
PLEASE NOTE: the appliance will regulate itself automatically to maintain the target humidity rate
during the period of operation.
If you wish to exit the program, select “00 H” or start the appliance with button A; the light will
switch off.
• DRY Function for Drying clothes (Mod. DH4116, DH4120 & DH4130)
Press the DRY (D) button to start the clothes drying function.
Continuous dehumidification and swing of the air outlet vent will start up automatically for enhan-
ced clothes drying.
Blue lignt on Prog Speed
H
um
i
dity
Temperature and humidity of the room
To Next Page
Loading...
Need help?
General
