EN
10
SHOULD A PROBLEM ARISE
Type of issue Aspects to be checked
The unit does not work when turned on. The insufficient water level indicator light flashes
Position the unit (leaning). Position the water tank.
Connect the unit
Required water level not yet reached in the nebuli-
zation chamber (wait a few moments).
The humidifying capacity is too low. Close doors and windows.
Mist output rate too low.
Clear the air vents and nozzle.
The room temperature humidity level is too high. Set the target humidity level.
Condensation in the room. Room temperature level too low.
The unit is too noisy. Place your appliance on a stable, flat surface.
The appliance stops. The programmed operating period has elapsed.
The water level indicator light flashes
Set the target humidity level.
To Next Page
Loading...
