7
Problems Possible causes Solutions
There is no steam. The appliance has not been
turned on.
Check that your appliance is properly
plugged in and press the On / Off button
(on the front of the appliance).
The power light should turn on.
The hose has been
obstructed.
Check that the hose is not bent or twisted.
There is no water left. Turn off the appliance and refill the water
tank.
The steam flow
is low.
Your steamer has a build-up
of scale because it has not
been rinsed out regularly.
Descale the steamer at least once a year
or every 50 hours of use. If your water is
hard, increase the frequency.
There is no water left. Turn the appliance off and refill it.
Water runs
through the holes
of the steambrush.
There is condensation in the
hose.
Never use steamer in a horizontal posi-
tion. Hold the hose vertically outstretched
and wait for water to flow back into the
steamer.
The steamer takes a
long time to heat.
Your steamer has a build-up
of scale because it has not
been descaled regularly.
Rinse out the steamer at least once
a year or every 50 hours of use. If your
water is hard, increase the frequency.
Troubleshooting
If it is not possible to establish the cause of the problem, seek the assistance of an
Approved ROWENTA Service Center www.rowenta.com
EN
DE
FR
NL
IT
ES
PT
SV
EL
TR
RU
UK
PL
1103907038-index 01 IS9100 D1_110x220 31/03/11 12:07 Page7
To Next Page
Loading...
Need help?
General
