EasyManua.ls Logo

Rowenta OptiGrill+ GR712 - Material and Coating Care; Product Compliance and Initial Use

Rowenta OptiGrill+ GR712
39 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
EN
Do not use metal scouring pads, abrasive wire wool or harsh
scouring powder as this may damage the nonstick coating.
Do not move the appliance when in use.
Do not carry the appliance by the handle or metallic wires.
Never run the appliance empty.
Do not use aluminium foil or other objects between the plate
and the food being cooked.
Do not remove the grease collection tray while cooking. If
the grease collection tray becomes full when cooking: let the
appliance cool down before emptying.
Do not place the hot plate on a fragile surface or under water.
To preserve the non-stick properties of the coating, avoid
excessive pre-heating with the appliance empty.
The plates should never be handled when hot.
Do not cook food in aluminium foil.
To avoid spoiling your appliance, do not use ambé recipes in
connection with it at any time.
Do not place a sheet of aluminum or any other object between
the plates and the heating element.
Never heat or cook whilst the grill is open.
Never heat up the appliance without the cooking plates.
Tips/information
Thank you for buying this appliance, which is intended for
domestic use only.
For your safety, this appliance complies with the applicable
standards and regulations - Low voltage directive -
Electromagnetic compatibility - The environment - Materials in
contact with food.
On rst use, there may be a slight odour and a little smoke
during the rst few minutes.
Our company has an ongoing policy of research and
development and may modify these products without prior
notice.

Related product manuals