29
EN
1 • Preparing
1 2
1.
Remove all packaging materials, stickers
and accessories from the inside and the
outside of the appliance.
The colour sticker on the cooking level
indicator can be changed, according to
the language. You can replace it with the
one on the inside of the packaging.
2.
Before using for the rst time,
thoroughly clean the plates with warm
water and a little dishwashing liquid,
rinse and dry thoroughly.
3-4.
Position the removable drip tray at the
front of the appliance.
3 4
OK
2 • Pre-heating
5 6
5.
For the best results you may wipe the
cooking plates using a paper towel
dipped in a little cooking oil, to improve
the non-stick release.
6.
Remove any surplus oil using a clean
kitchen paper towel.
7.
Make sure that the upper and lower
plates are correctly positioned in the
product. Do not activate pre-heating
without the plates. Plug your appliance
into the mains power supply. (Note
that the cord should be completely
extended).
8.
Press the on/o button.
Caution: Make sure there are no food
between the plates
7 8
To Next Page
Loading...
