32
19 20
19-20.
When the color corresponding to your
choice of cooking level appears and that
the beep sounds, open the appliance
and remove your food.
21.
Close the appliance. The control panel
will light up and set itself to ‘choice of
program’ mode.
Comment: the security system will
turn o automatically if no program
selection is made.
21
Successive cookings
If you wish to cook larger quantities, set in temperature the appliance again (see section2.
“Preheating”, starting from point9), even if cooking the same type of food or same program.
Cooking larger quantities of food:
Once your rst batch of food has nished cooking:
1. Make sure that the appliance is closed and no remnants of food remain inside.
2. Select the correct cooking mode or programme (this step is necessary even if the cooking
mode is the same as for the foods you have just nished cooking).
3. Press the button ”OK” to begin preheating. While preheating, the light indicating the level
of cooking will blink purple.
4. Once preheating is complete, the appliance will beep and the indicator light will stop
blinking purple.
5. The appliance is ready to be used once preheating is complete. Open the grill lid and
place the food inside the appliance.
Important:
- Please note that preheating is required for each new cooking of food.
Reminder: before activating preheating, make sure that the appliance is closed and no
remnants of food remain inside.
- Then wait for preheating to nish before opening the grill and placing food inside.
Note: if the new pre-heating cycle is activated immediately after the end of the preceding
cycle, the pre-heating time will be reduced.
To Next Page
Loading...
