37
Problem Cause Solution
After preheating,
I placed the food
inside and closed the
appliance,
but the
indicator light stays
purple and cooking
does not begin.
• The quantity of food
inside the appliance is
greater than 4 cm.
• The quantity of food should
not exceed 4 cm.
• The grill was not opened
completely when placing
the food inside.
• Open the grill completely
and close it again.
• The appliance does
not detect food inside.
The quantity of food
is insucient, “OK” is
blinking.
• Conrm cooking activation
by pressing the button .
The appliance will
activate in manual mode
+ The indicator light
will blink red.
+
Button , and
light xed
• Preheating time was cut
short.
• Monitor the cooking
periodically (for use in
manual mode).
Or
• Stop the grill, remove food,
close the grill, select the
new cooking programme
you wish to use and wait
for the preheating cycle
to nish.