To Next PageTo Next Page
Need help?Do you have a question about the Rowenta Silence Force Cyclonic and is the answer not in the manual?
General| Brand | Rowenta |
|---|---|
| Model | Silence Force Cyclonic |
| Category | Vacuum Cleaner |
| Language | English |
Your vacuum cleaner is an electrical appliance: it must only be used under normal operating conditions.
Make sure that the operating voltage of your vacuum cleaner is the same as your supply voltage.
Repairs should only be carried out by specialists using original replacement parts.
Unpack your appliance, keep your guarantee form and read the instructions carefully.
Each time before use, unwind the power cord completely. Do not jam it.
Clip the end of the flexible hose (16a) into the suction inlet (9).
Unwind the power cord completely, plug in your vacuum cleaner and press the ON/OFF button.
After use, switch off your vacuum cleaner by pressing the ON/OFF button and unplug it.
Each time after use, we recommend that you clean the HEPA filter.
Cleaning is performed automatically and requires no action from you.
The suction power may still remain unsatisfactory after the mechanical or automatic cleaning.
Wipe the body of the appliance and the accessories with a soft cloth.
Check that the appliance is plugged in correctly.
Check the filter and separator is blocked, unblock them.
Check the tube, flexible hose, or pipe between suction inlet and separator.
Pull the power cord out again and press the power cord rewind button.
